75 BPM in milliseconds
One beat at 75 BPM is 800.00 ms (60,000 ÷ 75). Below are the delay times for every note value, reverb settings that fit the groove and loop lengths in samples.
Delay times at 75 BPM
| Note | Straight (ms) | Dotted (ms) | Triplet (ms) | LFO (Hz) |
|---|---|---|---|---|
| 1/1 — Whole note | 3200.0 | 4800.0 | 2133.3 | 0.31 |
| 1/2 — Half note | 1600.0 | 2400.0 | 1066.7 | 0.63 |
| 1/4 — Quarter note | 800.0 | 1200.0 | 533.3 | 1.25 |
| 1/8 — Eighth note | 400.0 | 600.0 | 266.7 | 2.50 |
| 1/16 — Sixteenth note | 200.0 | 300.0 | 133.3 | 5.00 |
| 1/32 — Thirty-second note | 100.0 | 150.0 | 66.7 | 10.00 |
| 1/64 — Sixty-fourth note | 50.0 | 75.0 | 33.3 | 20.00 |
Reverb pre-delay and decay
A 1/64-note pre-delay keeps the dry attack clear; decay times are set so pre-delay plus tail equals a musical length.
| Setting | Time |
|---|---|
| Pre-delay (1/64 note) | 50.0 ms |
| Short decay (half bar) | 1.55 s |
| Medium decay (1 bar) | 3.15 s |
| Long decay (2 bars) | 6.35 s |
Bars, phrases and samples
| Length | Seconds | Samples at 44.1 kHz | Samples at 48 kHz |
|---|---|---|---|
| 1 beat | 0.80 | 35,280 | 38,400 |
| 1 bar of 4/4 | 3.20 | 141,120 | 153,600 |
| 1 bar of 3/4 | 2.40 | 105,840 | 115,200 |
| 8 bars of 4/4 | 25.60 | 1,128,960 | 1,228,800 |
| 16 bars of 4/4 | 51.20 | 2,257,920 | 2,457,600 |
Where 75 BPM shows up
75 BPM is in the typical range of lo-fi hip-hop. At double time (150 BPM) it matches techno, trap, hardstyle. The same delay settings work at 37.5 and 150 BPM by moving one note value: a quarter note here is an eighth at 150 BPM.
← 70 BPM · calculator · 80 BPM →
Not sure your track is exactly 75? Check it with the BPM detector — it reports tempos to a tenth of a BPM.