110 BPM in milliseconds
One beat at 110 BPM is 545.45 ms (60,000 ÷ 110). Below are the delay times for every note value, reverb settings that fit the groove and loop lengths in samples.
Delay times at 110 BPM
| Note | Straight (ms) | Dotted (ms) | Triplet (ms) | LFO (Hz) |
|---|---|---|---|---|
| 1/1 — Whole note | 2181.8 | 3272.7 | 1454.5 | 0.46 |
| 1/2 — Half note | 1090.9 | 1636.4 | 727.3 | 0.92 |
| 1/4 — Quarter note | 545.5 | 818.2 | 363.6 | 1.83 |
| 1/8 — Eighth note | 272.7 | 409.1 | 181.8 | 3.67 |
| 1/16 — Sixteenth note | 136.4 | 204.5 | 90.9 | 7.33 |
| 1/32 — Thirty-second note | 68.2 | 102.3 | 45.5 | 14.67 |
| 1/64 — Sixty-fourth note | 34.1 | 51.1 | 22.7 | 29.33 |
Reverb pre-delay and decay
A 1/64-note pre-delay keeps the dry attack clear; decay times are set so pre-delay plus tail equals a musical length.
| Setting | Time |
|---|---|
| Pre-delay (1/64 note) | 34.1 ms |
| Short decay (half bar) | 1.06 s |
| Medium decay (1 bar) | 2.15 s |
| Long decay (2 bars) | 4.33 s |
Bars, phrases and samples
| Length | Seconds | Samples at 44.1 kHz | Samples at 48 kHz |
|---|---|---|---|
| 1 beat | 0.55 | 24,054.5 | 26,181.8 |
| 1 bar of 4/4 | 2.18 | 96,138 | 104,640 |
| 1 bar of 3/4 | 1.64 | 72,324 | 78,720 |
| 8 bars of 4/4 | 17.45 | 769,545 | 837,600 |
| 16 bars of 4/4 | 34.91 | 1,539,531 | 1,675,680 |
Where 110 BPM shows up
110 BPM is in the typical range of deep house, hip-hop, pop, afrobeats, amapiano, dancehall, disco. The same delay settings work at 55 and 220 BPM by moving one note value: a quarter note here is an eighth at 220 BPM.
← 105 BPM · calculator · 115 BPM →
Not sure your track is exactly 110? Check it with the BPM detector — it reports tempos to a tenth of a BPM.